Brother International Quattro 2 6700D My Custom Design Guide - English - Page 32
Specifying the Width of Satin, Stitches, Specifying the Sewing Direction of, Fill Stitches
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Specifying the Width of Satin Stitches 1 Press or beside . (The default setting is 2.0 mm when the application is started up.) To select a narrower width, press . To select a wider width, press . Each press of mm. makes the width narrower by 0.5 Each press of makes the width wider by 0.5 mm. A setting between 1.0 mm and 3.0 mm in 0.5 mm increments can be specified. Setting examples 1.0mm 2.0mm 3.0mm 3. Specifying the Sewing Direction of Fill Stitches 1 Press or beside . (The default setting is started up.) when the application is Each press of changes the setting in the following order: → → . Press to reverse the order of . Setting examples Notes • If the size of the created pattern is larger than 10 cm × 10 cm, it is recommended that be set in order to prevent shrinkage. 32