Brother International Quattro 2 6700D My Custom Design Guide - English - Page 35

4 Converting to Embroidery Data Now, the created image data can be converted to embroidery data. 1 Press . The following message appears. 2 If the image data is correctly converted to embroidery data, the embroidery data check screen shown at the left appears. The pattern moves to the center of the embroidery pattern display area and the embroidery data is displayed. If the message shown at the left appears, either the drawing contains too many lines or the design is too complicated to be converted to embroidery data. Press to return to the pattern drawing screen, and then correct the data. In this screen, the number of thread colors and the number of stitches in the created pattern can be checked. For details on the various displays, refer to "Embroidery Data Check Screen" on page 12. To change the pattern, press to change the embroidery data back to image data and display it in the pattern drawing screen. * However, lines of the drawing other than those drawn freehand to close openings cannot be added, edited or their color changed. To change a line, continue pressing before the first color of an area was selected. until the drawing returns to the condition 35