Brother International IntelliFax-1270 Users Manual - English - Page 72
Using Remote Retrieval Access Code, Remote Commands, Change Paging/Fax Forwarding Setting
View all Brother International IntelliFax-1270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
62 CHAPTER EIGHT Using Remote Retrieval Access Code 1 Dial your fax number from a touch tone phone. 2 When your fax machine answers and beeps, immediately enter your Remote Retrieval Access Code (159F). 3 Your fax machine signals the kinds of messages received: 1 long beep - Fax message(s) No beeps - no messages. 4 Your fax machine then prompts you with two short beeps to enter a command. If you wait longer than 30 seconds to enter a command, your machine hangs up. If you enter an invalid command, your machine beeps three times. 5 Press 9 0 to reset your machine when you finish. 6 Hang up. Remote Commands Follow the commands below to access features remotely. When you call the fax machine and enter your Remote Retrieval Access Code (159F), the system will signal you with two short beeps to enter a remote command. Change Paging/Fax Forwarding Setting Press 9 5 . then to Turn feature off - Press 1 . Enter Fax Forwarding - Press 2 . Enter Paging - Press 3 . Program Fax Forward Number - Press 4 , then retrieve Memory Status List (see page 64). Confirm Fax Forward Number - Press 5 . Turn Fax Storage ON - Press 6 . Turn Fax Storage OFF - Press 7 .