Campbell Scientific CSAT3 CSAT3 3-D Sonic Anemometer - Page 59
CSAT3 Binary Data Output Format
View all Campbell Scientific CSAT3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Appendix B. Serial Communications with the CSAT3 Nassi-Shneiderman diagrams are given in FIGURE B-1and FIGURE B-2 for collecting data using a PC and the RS-232 port. In FIGURE B-1, the PC is the Trigger Source and the data acquisition system. In FIGURE B-2, the anemometer is triggered by its internal timer and a PC is the data acquisition system. Use the logic in FIGURE B-1 when the CSAT3 is measured along with other analog/digital signals. FIGURE B-1. PC as the trigger source FIGURE B-2. CSAT3 as the trigger source B.2 CSAT3 Binary Data Output Format Five words are sent by the CSAT3's RS-232 output. Words 0 through 3 are 16 bit signed integers and word 4 is 16 bit unsigned integer. The five words are sent starting with word 0 and ending with word 4. A description of each word is given in TABLE B-2. B-3