Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 48
Operation
View all Canon CINE-SERVO 17-120mm T2.95-3.9 EF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5 OPERATION 5 OPERATION 5-1. ZOOM OPERATION 5-1-1. Manual Zoom Operation FOCUS MANU. SERVO REMOTE1 REMOTE2/ VIRTUAL MANU. REMOTE3 ZOOM SERVO 1 Set the zoom operation change-over knob at the bottom of the lens drive unit to MANU. position. 2 Turn the zoom ring (or zoom lever) to perform zoom operation. Zoom Operation Change-over Knob Toward Widest end CAUTION The zoom operation change-over knob must be set to the "MANU." position before performing manual zoom operations. The lens may be damaged if manual zoom operations are forcibly performed with the knob at the "SERVO" position. Toward Telephoto end Zoom Ring Zoom Lever 5-1-2. Servo Zoom Operation Zoom operation can be performed by driving the built-in motor in the lens. T W Zoom Rocker Seesaw 7 x 1 Set the zoom operation change-over knob to SERVO position. 2 Pressed the zoom rocker seesaw to perform zoom operation. Zoom speed changes by the depth of the switch being pressed. The deeper the switch is pressed the faster the zoom speed becomes. IRIS AM I.G. AUX RET MEMO I 5-1-3. Maximum Zoom Speed Adjustment The maximum speed of zoom when the zoom rocker seesaw is pressed can be adjusted with the adjusting volume. Max. Zoom Speed Adjusting Volume This adjustment can be performed on the information display. Refer to the Information Display Manual. E10