Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 57

mount lens is used, remove the 12-pin cable

Get Canon CINE-SERVO 17-120mm T2.95-3.9 EF PDF manuals and user guides View all Canon CINE-SERVO 17-120mm T2.95-3.9 EF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 6 Cap the contact on the lens body. Cap If power is supplied from the camera when the PL mount lens is used, remove the 12-pin cable and then cap the connector. 7 Place the detached drive unit in the supplied stor- age bag. CAUTION • Take care not to damage the drive unit cover when removing the drive unit fixing screws. • Use a Phillips screwdriver with a shaft diameter of 4mm or less to remove the drive unit fixing screws. • Never insert the removed screws into the screw holes in which the drive unit was fixed. • When the lens is tilted, the zoom ring may turn and the zoom position may change. To retain the zoom position when the lens is tilted, mount a cinema operation accessory with adjustable torque and with a pitch of 0.5. • If the drive unit is removed, the iris ring may turn and the iris position may change. To retain the iris position, mount a cinema operation accessory with adjustable torque and with a pitch of 0.4 on the iris ring. For details on the operation accessory with a pitch of 0.4, contact Canon Inc. or Canon distributers & sales representatives. E19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
E19
CAUTION
• Take care not to damage the drive unit cover when removing the drive unit fixing screws.
• Use a Phillips screwdriver with a shaft diameter of 4mm or less to remove the drive unit fixing screws.
• Never insert the removed screws into the screw holes in which the drive unit was fixed.
• When the lens is tilted, the zoom ring may turn and the zoom position may change. To retain the zoom position when
the lens is tilted, mount a cinema operation accessory with adjustable torque and with a pitch of 0.5.
• If the drive unit is removed, the iris ring may turn and the iris position may change. To retain the iris position, mount a
cinema operation accessory with adjustable torque and with a pitch of 0.4 on the iris ring. For details on the opera-
tion accessory with a pitch of 0.4, contact Canon Inc. or Canon distributers & sales representatives.
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6
Cap the contact on the lens body.
If power is supplied from the camera when the PL
mount lens is used, remove the 12-pin cable and
then cap the connector.
7
Place the detached drive unit in the supplied stor-
age bag.
Cap