Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 60
Automatic Adjustment Of The Mechanical End
View all Canon CINE-SERVO 17-120mm T2.95-3.9 EF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 6-3. AUTOMATIC ADJUSTMENT OF THE MECHANICAL END Automatically adjust the mechanical end of the zoom, focus and iris of the lens body and drive unit. Perform this adjustment if the drive unit is detached and reattached on the lens body again. Zoom Operation Change-over Knob FOCUS MANU. SERVO REMOTE1 REMOTE2/ VIRTUAL MANU. REMOTE3 ZOOM SERVO Focus Operation Change-over Knob Set the zoom/focus operation change-over knob on the bottom of the drive unit to SERVO position before starting the automatic adjustment of the mechanical end. Perform the following operation on the display and perform the automatic adjustment of the mechanical end. Do not touch operation rings, such as focus drive gear and drive gear during the automatic adjustment. Initial top screen MENU A Fr1P A 1 Shtl A 2 Fr1P IG: 50 [Adj] [Trk]OFF [I-Tq]H Screen A MENU A Fr1P A 1 Shtl A 2 Fr1P IG: 50 [Adj] [Trk]OFF [I-Tq]H Lens AutoAdjust OK? y/n Auto-Adjustment: Succeeded Lens Interface: Connected 1 Press the key and then press the key. [Adj] is highlighted. 2 Press the Set key. The screen changes to the mechanical end adjustment screen. 3 Press the key and press the Set key. Adjustment begins. The screen flashes during adjustment. The adjustment is completed. When Set is pressed after the adjustment ends, the screen A returns. * (Note) If "Auto-Adjustment: Error/Lens Interface: Non-Connected" appears when the mechanical end adjustment is completed, contact Canon Inc. or Canon distributers & sales representatives. E22