Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 51

5 OPERATION 2. How to operate the speed preset function When the "Sped" switch is pressed, the zoom starts to move at the preset speed and to the determined direction (toward telephoto angle or widest angle) stored in section 1 until the zoom reaches its end. 3. How to cancel movement in Speed Preset Movement in Speed Preset can be canceled by any of the following operations. 1）Press the "Sped" switch again.→ Zoom movement stops. 2）Perform zoom operation with the zoom rocker seasaw / the "Shtl" switch / the "Fr1P", "Fr2P", "Fr1F", "Fr2F" switch. 5-1-7. Framing Preset There are three framing preset types based on how the settings are combined. ［Zoom］ This enables a predetermined picture angle and movement speed (zoom speed) to be reproduced easily. ［Focus］ This enables a predetermined focus and movement speed (focus speed) to be reproduced easily. ［Z+F］ This enables the movement speed (focus speed, zoom speed) to a predetermined focus and picture angle to be reproduced easily. It must be set on the information display. Preset Frame1: Frame2: ZSpeed: Zoom Zoom 800 The framing preset setting is changed on the Preset screen on the information display. The "Frame1" setting is changed to "Zoom", "Focus", or "Z+F". NOTE Up to two framing presets, Frame1 and Frame2, can be stored in the memory. Only Frame1 is described in the description given on the following pages. Frame1 is indicated as "Fr1P". How to set the zoom speed to the framing memory position Movement speed to the framing position is selected by assigning the "Fr1P" or "Fr1F" switch. "Fr1P"----------For the preset speed setting（preset speed）(Assigned to the AUX switch at the factory.) "Fr1F"----------For the maximum speed setting（fast speed） For details on how to assign the switches, refer to 5-5. Switch Operations. Setting combinations Frame preset control Zoom Focus Z+F Control content Zoom operation control Focus operation control Zoom + focus operation control Movement speed setting "Fr1P", "Fr2P" (speed settable) "Fr1F", "Fr2F" (maximum speed) The zoom moves at the preset speed. The zoom moves at the maximum speed. The focus moves at the maximum speed. *1 The zoom and focus move at the preset speeds. The focus moves at the maximum speed. The zoom and focus move at the maximum speed. *1 : The zoom and focus are controlled in such a way that they start and stop simultaneously. Framing Preset [Zoom]/[Focus]]/[Z+F] Setting The figure below is shown as an example. Actual state of the switch may look different if the function is allocated to the different switch. 1）Fr1P function--------Assigned to the AUX switch by factory default. E13