Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 52

5 OPERATION 1. Setting the framing memory position Zoom Rocker Seesaw "Shtl" Switch MEMO Switch "Fr1P" Switch Zoom (and focus) to the position that you want to store, while holding this zoom (and zoom focus) position, press the "Fr1P" switch while holding down the MEMO switch. NOTE This framing memory position is different from the shuttle memory position (Refer to "5-1-5. Suttle-Shot Function"). The stored zoom position remains in the memory, even after the power is turned off. 2. Moving to the framing memory position Once the "Fr1P" switch is pressed, the zoom starts to move toward the framing memory position at the preset speed. When the zoom reaches to the framing memory position, it stops and stays there. 3. Canceling the movement to the framing memory position or switching to other zoom operation. During movement to the framing memory position, the movement can be canceled and/or switched to other zoom operation by any of the following operations. [Zoom Framing Preset] • Pressing the "Fr1P" switch again. • Zoom operation with the zoom rocker seesaw can immediately take over. • Zoom operation with the "Shtl" switch can immediately take over. [Zoom, Focus Framing Preset] • While is RET switch is held down, the on-air picture (returned picture) can be viewed in the viewfinder. E14