Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 58
How To Attach The Drive Unit
View all Canon CINE-SERVO 17-120mm T2.95-3.9 EF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 6-2. HOW TO ATTACH THE DRIVE UNIT 1 Detach the cap from the contact on the lens body, fix the cap Cap on the projection on the main body and remove the drive unit fixing screws (3) mounted on the lens body. xxxxxxxx Drive unit fixing screws (x3) 2 Check that the serial numbers of the lens body and the drive unit match. * If the lens and drive unit are used when the serial numbers do not match, the error message appears on the display. * If the serial numbers do not match, malfunction may occur. xxxxxxxx Serial No. Positioning pin Connector 3 Check that there are no foreign matters in the three drive unit fixing screw holes in the lens body. CAUTION If the drive unit is fixed when there is a foreign material in a screw hole, the lens body may be damaged. 4 Fit the connector of the drive unit into the connector of the lens using the positioning pin of the drive unit as a guide, and while pushing the drive unit to the lens body, fix them temporarily by lightly tightening the three fixing screws that were inserted into the lens body. CAUTION Use the 6mm-long drive unit fixing screws that were inserted into the lens body and do not use unspecified screws. E20