Canon CINE-SERVO 17-120mm T2.95-3.9 EF User Manual - Page 56
How To Attach And Detach The Drive Unit
View all Canon CINE-SERVO 17-120mm T2.95-3.9 EF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 6 HOW TO ATTACH AND DETACH THE DRIVE UNIT This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while referring to Section 6-2. 6-1. HOW TO DETACH THE DRIVE UNIT 1 Turn the camera and the lens power off. 2 Disconnect the 12-pin cable. 3 Detach the lens body from the camera. 4 Remove the three drive unit fixing screws. 5 Insert the removed screws (3) into the specified screw holes (3) shown on the following seal in the lens body. Docking screw caution seal Docking screw caution seal E18
E18
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual
lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while
referring to Section 6-2.
6-1. HOW TO DETACH THE DRIVE UNIT
1
Turn the camera and the lens power off.
2
Disconnect the 12-pin cable.
3
Detach the lens body from the camera.
4
Remove the three drive unit fixing screws.
5
Insert the removed screws (3) into the specified
screw holes (3) shown on the following seal in the
lens body.
Docking screw caution seal
Docking screw
caution seal