Canon EOS Rebel T2 EOS Rebel T2 manual - Page 15
Loading and Unloading Film
View all Canon EOS Rebel T2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
=Loading and Unloading Film Loading Film After you load the film, the camera first winds the entire roll onto the camera's take-up spool. With DX-coded film, the camera automatically sets the film's ISO speed. Then each time a picture is taken, one frame of film is rewound back into the film cartridge. The frame counter shows always number of shots remaining. 1 Turn the Mode Dial to any setting except . 2 Open the back cover. • Slide down the back cover release lever and open the back. 3 Insert the film cartridge at a slight angle. Wrong 4 Align the film leader edge with the mark. • Hold down the film cartridge while pulling out the film leader. If you pull out the film leader too much, rewind it back into the film cartridge. 5 Close the back cover. • Close the back cover until it snaps shut. sFilm prewind will start and there will be a shutter-release sound about 10 sec. later. The icon and frame count will also be displayed on the LCD panel. sDuring the film prewind, the ISO speed will be displayed on the LCD panel. 15