Canon EOS Rebel T2 EOS Rebel T2 manual - Page 30
Focus Lock
View all Canon EOS Rebel T2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3Selecting the AF point★ Focus Lock After achieving focus, you can lock the focus on a subject and recompose the shot. This is called "focus lock." 1 Select the desired AF point. 2 Focus the subject. • Aim the AF point on the subject, then press the shutter button halfway. 3 Keep pressing the shutter button halfway and recompose the picture as desired. 4 Take the picture. • If focus has not been achieved, the focus confirmation light in the viewfinder will blink. In this case, you cannot take a picture even when you press the shutter button fully. Recompose the shot and focus again or see "When Autofocus Fails" (p.31). • If you use an external, EOS-dedicated Speedlite and focus cannot be achieved with the AF-assist beam, select the center AF point. • Focus lock also works in the Basic Zone modes (except ). Just start from step 2 above. 30