Canon EOS Rebel T2 EOS Rebel T2 manual - Page 46
FE Lock
View all Canon EOS Rebel T2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using the Built-in Flash jFE Lock★ FE (Flash Exposure) lock is for setting the correct flash exposure for any part of the subject. First pop-up the built-in flash. 1 Focus the subject. • Keep pressing the shutter button until step 3. 2 Aim the viewfinder center over the target subject, then press the button. sA preflash is fired and the icon will be displayed in the viewfinder. 3 Compose the shot and take the picture. • If the subject is beyond the effective flash range resulting in underexposure, the icon will blink. Get closer to the subject and repeat steps 1 and 2. • For the external Speedlite, use an EX-series Speedlite. If the camera is used with an EZ-, E-, EG-, ML-, or TL-series Speedlite, the flash will not fire in the TTL and A-TTL autoflash modes. Use the manual flash mode if the Speedlite has one. About E-TTL II Autoflash E-TTL II is a new autoflash exposure system incorporating improved flash exposure control and lens focusing distance information, making it more precise than the previous E-TTL (evaluative flash metering with preflash) system. The camera can execute E-TTL II autoflash with any EX-series Speedlite. 46