Canon MF7280 PCL Driver Guide - Page 71

Setting Up the Printer Configuration In order to use the functions of an optional unit attached to the printer, you need to specify the paper source options, output options, and other options in the printer driver, by setting up the printer configuration. 2 The printer configuration can be set up automatically while installing the driver, depending on the port selected for the machine. If the machine cannot be configured during the installation, follow the procedure below. There are two methods for setting up the printer configuration: automatic and manual. Getting Started IMPORTANT For the imageRUNNER 400/330, imageRUNNER 400/330-P1/R1, and imageRUNNER 600/550/60, the printer configuration cannot be set up automatically while installing the driver. Follow the procedure below to set up the printer configuration after the installation. Configuring Automatically If your printer is connected to a network, you can set up the printer configuration automatically. IMPORTANT • If you are using a shared printer in the Print Server (Point and Print) environment, it is necessary to install the Canon Driver Information Assist Service in the server PC in order to set up the printer configuration automatically. (See "Installing the Canon Driver Information Assist Service," on p. 2-33.) • If you are using a local printer (connected to an LPT port, USB port, etc.), you cannot set up the printer configuration automatically. • For the imageRUNNER 400/330, imageRUNNER 400/330-P1/R1, and imageRUNNER 600/550/60, one of the following environments is required: - Novell NetWare IPX/SPX Client Software needs to be installed in your PC to use IPX/ SPX as the protocol. - TCP/IP Protocol provided by Windows needs to be installed in your PC to use TCP/IP as the protocol. Setting Up the Printer Configuration 2-45