Canon MF7280 PCL Driver Guide - Page 76

Configuring the Device Function Settings If you cannot set up the printer configuration automatically (see "Setting Up the Printer Configuration," on p. 2-45), you need to specify the device functions 2 manually. Configuring the Controller Version Getting Started NOTE For the Color imageRUNNER C2620, Color imageRUNNER C3200, Color imageRUNNER C3200-C1, Color imageRUNNER C3220, imageRUNNER C3100, imageRUNNER C3170, imageRUNNER C5800, imageRUNNER C6800, imageRUNNER 105, imageRUNNER 105-M1, imageRUNNER 105-M2, imageRUNNER 105+, imageRUNNER 2230, imageRUNNER 2830, imageRUNNER 2870/2270, imageRUNNER 2870G/2270G, imageRUNNER 3300/2800/2200, imageRUNNER 3300i, imageRUNNER 3530, imageRUNNER 4570/3570, imageRUNNER 4570G/3570G, imageRUNNER 5000i, imageRUNNER 7105/7095/7086, imageRUNNER 7105/7095/ 7086-S1, imageRUNNER 7200, imageRUNNER 7200-M1, imageRUNNER 7200-M2, imageRUNNER 8070, imageRUNNER 85, imageRUNNER 85-M1, imageRUNNER 85-M2, imageRUNNER 85+, imageRUNNER 8500, imageRUNNER 8500-M1, imageRUNNER 8500-M2, and imageRUNNER 9070, the available functions vary depending on the version of the controller for your printer. The controller version must be configured in order to use the supported functions. 1 Print the Configuration Page. ❑ On the printer control panel, press (Additional Functions). ❑ Press [Report Settings] ➞ [Printer] under . ❑ Press [PCL] ➞ [Configuration Page] ➞ [Yes]. NOTE • The procedure of printing the Configuration Page differs depending on the model of the printer you are using. • The Controller Function ID and Function Version may not print out depending on the model of the printer you are using. 2 Confirm the Controller Function ID and Function Version printed on the Configuration Page. 2-50 Configuring the Device Function Settings