Canon MF7280 imageCLASS MF7280 Reference Guide - Page 128
Press [OK]., Press [Next]
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Customizing Settings ❑ Press [X] to specify the horizontal axis of the paper ➞ enter a value using the numeric keys on the touch panel display. ❑ Press [Y] to specify the vertical axis of the paper ➞ enter a value using the numeric keys on the touch panel display. ❑ Press [OK]. 3 The display returns to the paper size selection screen. NOTE • If you make a mistake when entering values, press [C] on the touch panel display ➞ enter the correct values. • You can enter only 2, 4, 8 or 16 as the denominator. • The value entered in inches is converted to millimeters by the machine each time it is entered. Thus, there may be a slight difference between the value calculated and the actual value entered. • To enter values in millimeters, press [mm]. • When entering the value in millimeters, you can also use - (numeric keys), and (Clear) to clear your entry. • When entering the value in millimeters, you can also change the value by pressing [-] or [+] in increments of 1.0 mm, even if you have entered the value. • If you enter a value outside the setting range, [OK] is grayed out and cannot be selected. Enter an appropriate value. • You can use values for [X] between 5 7/8inch (148 mm) and 17inch (432 mm), and for [Y] between 3 3/4" (95 mm) and 11 11/16" (297 mm). ❑ Press [Next] Specifying Common Settings 3-37