Canon MF7280 imageCLASS MF7280 Reference Guide - Page 52

Overview of the imageCLASS MF7280 Basic Operations Most operations on this machine are executed from the touch panel display. By pressing the keys according to the instructions on the touch panel display, you can utilize the functions of this machine efficiently. 2 CAUTION Press the touch panel display keys gently with your fingers. Do not press the touch panel display with a pencil, ballpoint pen, or other sharp objects that can scratch the surface of the touch panel display. Doing so may damage the touch panel display. NOTE Before using the touch panel display, peel off the protective film from the display. Switching the Functions Indicated on the Touch Panel Display After the power is turned ON, the following screen appears on the touch panel display. You can press (COPY) or (SEND) on the control panel, or [System Monitor] on the touch panel display to switch functions. (See "Initial Function at Power ON," on p. 3-15.) The area on the bottom of the touch panel display is used for messages that indicate the status of the machine. Pressing [System Monitor] enables you to check the status of the various devices, jobs, and consumables, and they are also displayed here. NOTE You can set the initial screen (the first screen that appears when the machine is turned ON) from the Additional Functions screen. The initial screen can be the Copy, Send, or System Monitor screen. Overview of the imageCLASS MF7280 2-5