Canon MF7280 imageCLASS MF7280 Reference Guide - Page 220
Gently push the paper drawer back into the machine until it, clicks into place in the closed position.
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
IMPORTANT • Paper which has been rolled or curled must be straightened out prior to use. • Make sure that the height of the paper stack does not exceed the loading limit mark ( ) at the back of the paper drawer and the corners are below the paper size guide clips. • Be sure to set the paper-size detecting lever correctly. If the lever is set to the wrong position, paper jams or dirty prints may occur, or the inside of the machine may get dirty. NOTE • Each paper drawer holds approximately 250 sheets of paper (22 lb bond (80 g/m2)). • If there are instructions on the package of paper about which side of the paper to load, follow those instructions. • When the paper is loaded into the paper drawer, the side facing up is the one printed on. • If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it. • For more information on the print direction of preprinted paper (paper which has 6 logos or patterns already printed on it), see "Relationship between Original Orientation and Preprinted Paper Output Chart," on p. 8-7. 5 Gently push the paper drawer back into the machine until it clicks into place in the closed position. Routine Maintenance CAUTION When returning the paper drawer to its original position, be careful not to get your fingers caught, as this may result in personal injury. IMPORTANT You will not be able to make copies or print if you load paper that exceeds the loading limit, or if the paper drawer is not completely pushed into the machine. Always check that the paper drawers are in place, and that the paper does not exceed the loading limit. 6-6 Paper Drawers