Canon MF7280 imageCLASS MF7280 Reference Guide - Page 67

Basic Operations Values in Inches If you want to enter values in inches in all modes which require a numeric entry, set Inch Entry to 'On' in Common Settings (from the Additional Functions screen). (See "Inch Entry," on p. 3-24.) This enables you to enter values in inches when you press [Inch] on a screen requiring a numeric entry or measurement. The default entry mode for numeric values is inches, but you can change it to millimeters by turning the Inch Entry mode 'Off'. 2 The following example shows you how to enter 5 1/2" for X value in the Irregular Size mode. 1 Press [5 1 2] using the numeric keys on the touch panel display. The entered values are displayed, as shown above. NOTE • If you make a mistake when entering values, press [C] on the touch panel display ➞ enter the correct values. • You can enter only 2, 4, 8, or 16 as the denominator. • The value entered in inches is converted to millimeters by the machine each time it is entered. Thus, there may be a slight difference between the value calculated and the actual value entered. • To enter values in millimeters, press [mm]. 2-20 Entering Characters from the Touch Panel Display