Canon MF7280 imageCLASS MF7280 Reference Guide - Page 282
List of Error Codes without Messages
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Remove the original from the feeder. Cause Remedy The machine cannot scan your original using the feeder. An original is placed in the feeder and on the platen glass. Remove the original from the feeder. Platen Glass is dirty. Cause The feeder's scanning area is dirty. Remedy Clean the feeder's scanning area. (See "Manual Feeder Cleaning," on p. 6-25.) List of Error Codes without Messages If a job or operation does not complete successfully, check the error code, and perform the necessary operations according to the error code displayed. You can check the error code on the Details screen when you press [Log] on the System Monitor screen. (See "Copy/Print Job Details," on p. 4-8.) If a fax job does not complete successfully, the error code is printed in the Results column on the Activity Report and TX Report. However, if a send job is canceled, 7 "STOP" is printed in the Results column on the TX Report. (See Chapter 7, "Printing Communication Reports," in the Facsimile Guide.) Perform the necessary procedures according to the error code. Troubleshooting # 001 Cause Remedy Paper or originals are jammed. Remove any jammed paper or originals. (See "Clearing Paper Jams," on p. 7-3, and "Feeder," on p. 7-13.) # 009 Cause 1 There is no paper. Remedy Load paper. (See "Paper Drawers," on p. 6-2.) Cause 2 The paper drawer is not inserted correctly. Remedy Insert the paper drawer properly. (See "Paper Drawers," on p. 6-2.) 7-28 List of Error Messages