Canon MF7280 imageCLASS MF7280 Reference Guide - Page 283

# 037 Cause Documents could not be received because there was insufficient memory available. Remedy Erase unnecessary documents and documents with errors from memory to increase the amount of available memory. (See Chapter 3, "Checking/Changing the Fax Jobs," in the Facsimile Guide.) # 701 Cause The specified Department ID does not exist, or the password has changed. Remedy Enter the correct Department ID or password using - (numeric keys) on the control panel, and try again. (See "Entering the Department ID and Password," on p. 2-21.) # 749 Cause You could not execute the job because a service call message is being displayed. Remedy Turn the main power OFF, wait for 10 seconds, and turn the main power back 7 ON. If the machine still does not work normally, turn the main power OFF, disconnect the machine, and contact Canon Authorized Service Facilities or the Canon Customer Care Center. Troubleshooting # 816 Cause You cannot print because the set page limit total has been reached. Remedy Contact your System Manager. # 852 Cause An error occurred because the main power switch was turned OFF while a job was being processed. Remedy Check to see if the main power switch is turned ON. Try processing the job again, if necessary. List of Error Messages 7-29