Canon PIXMA i860 Quick Start Guide - Page 62
Contact the Customer Care Center.
View all Canon PIXMA i860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Printing Maintenance (5) When the confirmation message is displayed, click OK. Print head deep cleaning starts when the POWER lamp starts blinking. Do not perform any other operation until the print head deep cleaning is completed. This takes about one minute. Important The process takes one or two minutes to complete, so simply wait until the POWER lamp stops flashing. Note After print head deep cleaning finishes, print the nozzle check pattern to verify that the print head nozzles are clean. See "Printing the Nozzle Check Pattern" on page 51. If not, check that there are sufficient ink levels in all ink tanks before turning off printer. Be sure to perform another print head deep cleaning 24 hours after turning off printer. If this does not resolve the problem, the print head may be worn out. Contact the Customer Care Center. 60