Canon PIXMA i860 Quick Start Guide - Page 78

Troubleshooting Cannot Print Properly from the Digital Camera The following messages may be displayed on the digital camera or digital video camcorder when images are printed directly from them. Correct the error according to the procedure below. Camera Error Message Possible Cause Printer in use Images are printed from the computer Try This Wait until printing ends. The printer automatically starts printing the images from the camera after completing the current printing. Printer warming up The printer is warming up Wait until warm-up ends. When it is ready, the printer starts printing automatically. No Paper No paper is loaded Load the paper in the printer and press the RESUME/CANCEL button on the printer. Paper Jam A paper jam occurs in the printer Remove the jammed paper, load new media, and press the RESUME/CANCEL button. Printer cover open The front cover is open Close the front cover. No print head Print head is defective or not Install the print head again according to the Easy Setup installed Instructions. If the problem continues after reinstalling it, the print head may be defective. Contact the Customer Care Center. Waste tank full The waste ink tank is nearly full Press the RESUME/CANCEL button on the printer to recover from the error. Contact the Customer Care Center as soon as possible. Printer error An error requiring servicing Turn off the printer, unplug the power cord from the power has occurred (The POWER supply, plug the power cord back in, and then turn on the lamp on the printer flashes printer. If the same error occurs, contact the Customer Care alternately orange and green) Center. Ink is low It is about time to replace the ink tank with a new one. Use a new ink tank. Select Continue in the Low Ink Warning display to resume the printing. Ink tank is empty An ink tank is not inserted, or the ink tank has run out of ink. Replace the ink tank with a new one. 76