Canon VB-M740E Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 111
Video Record], E-mail Notification], External Device Output], witch Day/Night]
View all Canon VB-M740E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
It is necessary to set presets beforehand with [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] (P. 170). Important When control privileges are held by applications like Admin Viewer, and the camera angle has moved as a result of [Start Time Present], camera control is released. [Video Record] Select whether to record video depending on the timer event. If you select [Enable] and a timer event is triggered, video will be transmitted to the recording destination specified in [Video Record Action] (P. 96). [E-mail Notification] When [24-Hour Continuous Setting] is set to [Disable], select whether to send an e-mail notification depending on the timer event. If [Enable] is selected, e-mail notification is performed when a timer event is triggered. To use e-mail notification, you must set [Video Record] > [E-mail Notification] (P. 102) beforehand. [External Device Output] R11 M641 M741 When [24-Hour Continuous Setting] is set to [Disable], set whether external device output (1 or 2) is active or inactive when a timer event is triggered. [Repeat Interval] is not supported. [Switch Day/Night] When [24-Hour Continuous Setting] is set to [Disable], select the Day/Night Mode switching behavior when a timer event is triggered. This can only be set with [Timer 1]. Select [Switch to Day Mode] to switch to Day Mode at the start time, and Night Mode at the end time. Select [Switch to Night Mode] to switch to Night Mode at the start time, and Day Mode at the end time. [Repeat Interval] is not supported. Important • If you set [Start Time] and [End Time] and select a preset with [Start Time Preset], the Day/Night setting in [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] > [Preset Registration] tab > [Advanced Preset Settings] > [Day/Night] (P. 174) is given priority. Therefore, even if you set [Switch Day/Night] to [Switch to Day Mode] or [Switch to Night Mode], the [Switch Day/Night] setting will be disabled if the opposite setting has been configured in [Control for Admin] > [Advanced Preset Settings]. • When [Day/Night] in the Control for Admin is set to [Auto] (P. 165), [Switch Day/Night] will not happen when a timer event is triggered. • If the [Day/Night Mode Switching] settings switch Day/Night Mode while the user has camera control privileges, camera control will be released. Setting Page 4 111