Canon VB-M740E Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 76
hade Control, trength Auto], Haze Compensation, Infrared, Pan/Tilt, peed Control], Auto Flip
View all Canon VB-M740E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Important • [AGC Limit] will not function if [Admin Control] > [Exposure] (P. 162) is set to [Manual] or [Auto (Flickerless)]. • Minimum subject illumination may change when [AGC Limit] is set. [Smart Shade Control Strength (Auto)] Select the control strength when [Smart Shade Control] (P. 80) is set to [Auto]. • [Mild]: Select if noise is noticeable. • [Medium]: Recommended setting for Auto mode (default setting). • [Strong]: Select to increase visibility in dark areas. [Haze Compensation Strength (Auto)] Select the strength of compensation when [Haze Compensation] (P. 81) is set to [Auto]. Note When [Haze Compensation] is set to [Auto] and [Haze Compensation Strength (Auto)] is set to [Strong], contrast may be strong if the subject is not obscured by haze. If this happens, set [Haze Compensation Strength (Auto)] to [Mild]. [Infrared Strength (Auto)] M741 Select the infrared illumination strength when you have selected [Auto], [Auto (Flickerless)] or [Auto (Shutter-priority AE)] for [Exposure] (P. 80). Note • If all or part of the image appears to have a white glow, there is a possibility that a wall (even a wall not in the image) is reflecting the infrared lighting. If this occurs, please adjust the camera angle. • When using the infrared lighting, and there is a problem in getting the desired contrast on the object (would like the image brighter or darker), please adjust the Exposure Compensation (P. 80) and/or the Metering Mode (P. 80). [Pan/Tilt Speed Control] R11 R10 Select the pan/tilt control mode. If [Control by zoom position] is selected, the pan/tilt speed will be slower in telephoto, and faster in wide-angle. Note • Pan/Tilt Speed Control can also be set in [Control for Admin] > [Pan/Tilt Speed] (P. 148). • If [Control by zoom position] is selected, [Control for Admin] > [Pan/Tilt Speed] will also be fixed at [Control speed by zoom position]. [Auto Flip] R11 R10 Select this to enable or disable Auto Flip. If you enable Auto Flip and tilt the camera using the video display area in the Admin Viewer/VB Viewer (P. 147), the video will flip when the tilt angle of the camera nears 100°. For example, if tracking a subject that passes directly under a ceiling mounted camera (tilt angle 90°), the video will flip as the tilt angle nears 100° without the subject appearing inverted. Note Auto Flip may be disabled depending on the View Restriction Setting Tool settings (P. 209). 76