Canon VB-M740E Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 256

List of Log Messages Log Messages on the Camera This is a list of log messages that appear in the Log Viewer (P. 236). Log messages are classified into the following types. Category crit err warning notice info Level Error Error Warning Warning Information Code 4xx 3xx 2xx 1xx 0xx Fault level Software-level failure (Task operations will stop) Operational error (Operations will continue) Non-operational error Error external to the system Information on normal operation Note If no content is recorded in a log for approximately two hours, "-- MARK --" will be recorded in the message area. Error Log  System Error S302 Error on saving settings [err] Description Can't update system settings (S302) Meaning Countermeasure An error generated while the system was saving a setting. Setting could not be saved. Provide enough memory space by deleting unnecessary files in the user memory area, etc. S303 Error on saving settings [err] Description Meaning Countermeasure Can't update files of system settings (S303) An error generated while the system was saving a setting. Setting could not be saved. Provide enough memory space by deleting unnecessary files in the user memory area, etc. S307 Error on saving settings [err] Description (vbadmin.c XXX) Can't update system settings (S307) Meaning Countermeasure An error generated while the settings were saved by the setup protocol. Setting could not be saved. Provide enough memory space by deleting unnecessary files in the user memory area, etc. S310 Working error in event service [err] Description %1 cannot work event [%1][%2][%3] (S310) Error number %2 Cause of error %3 Meaning Error information An error occurred while the event service was running. Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing. 256