Canon VB-M740E Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 114
Event 1
View all Canon VB-M740E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
[Event Order] You can select the order two events must be triggered when [Event Linking Method] is set to [AND]. If set to [None], the order will not be considered. [Event Gap (seconds)] Enter the interval between two events that must be triggered when [Event Linking Method] is set to [AND]. A new linked event is triggered if the second event triggers within the specified interval after the first event was triggered. Event 1, 2 Specify the two events to be linked. The settings are the same for both. [Event Type] Select the event type for linking. Note [Intelligent Function] cannot be specified in both [Event 1] and [Event 2]. For [Volume Detection], select whether an ON event or OFF event triggers a linked event. For [Scream Detection], select whether an ON event or OFF event triggers a linked event. For [External Device Input], select External Device Input 1 or 2, then select an active event or inactive event to trigger a linked event. For [Timer], select the timer event number to use. For [Intelligent Function], select the Intelligent Function detection setting number (P. 217) to use. Operation Set the operations to be performed when linked events are triggered. [ON Event Operation] If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be executed according to their settings when a linked event (ON event) is triggered. 114