Canon VB-M740E Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 53

Set the Camera Angle After connecting to the camera, view the displayed video to make settings, such as the camera angle and zoom. Important You will have to reconfigure Intelligent Function detection area settings, privacy mask settings, or preset settings you have already made on a camera, if you change settings on that camera with the Camera Angle Setting Tool. 3 Camera Angle Setting Tool Set the Camera Angle and Zoom You can set the camera angle and zoom using the video display area or buttons.  Make Settings with the Operation Buttons and Sliders M641 M640 You can set the camera angle with the [Pan], [Tilt] and [Rotation] buttons. While you push a button, the camera angle will change in that direction. When you release the button, the camera angle will stop. Pans left or right. Tilts up or down. Rotates. If you rotate the camera angle using the [Rotation] slider, release the mouse button when the video display area is horizontal.  Set Camera Angle by Clicking Video M641 M640 If you click anywhere in the video display area, the camera angle will change to center on that location. If you click outside the pan or tilt range, however, the camera angle will only change for the one which is within its range. Note If the camera moves differently than the intended operation, or if settings in the full range displayed by control assist cannot be made, control assist may be out of alignment with the actual camera angle. If this happens, reset the camera angle after clicking [Control Assist Correction]. 53