Canon VB-M740E Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB-M - Page 230
Intelligent Function Setting Tool - Auto Tracking -, Set Auto Tracking
View all Canon VB-M740E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Intelligent Function Setting Tool - Auto Tracking - R11 R10 For Auto Tracking, set the detection area for moving objects while checking the video on the computer screen. The camera is controlled so that the detected moving object appears near the center of the video display area. You can also set which operations (such as e-mail notification, recording video, or playing audio from the speaker connected to the camera) are carried out when detection occurs. Set Auto Tracking Use the following steps to set Auto Tracking. 1 Obtain camera control privileges to set Auto Tracking. (P. 158) 2 Select [Specify the initial camera position] in [Camera Position Settings], then select a preset. For details on how to adjust presets, please refer to "Register Presets" (P. 170). If you select [Specify the initial camera position], the camera angle will be moved to the selected preset position. The camera angle will also be moved to the selected preset position after Auto Tracking ends. Important It is recommended that you configure preset camera angles in advance, so the camera will move to the preset position when auto tracking starts or ends. Note You can select presets that meet the following conditions. - Presets configured within the view restrictions. - Presets with [Show in viewers] selected in the [Preset Registration] tab (P. 171). - Presets with pan, tilt and zoom setting values (no empty entries) configured in the [Preset Registration] tab (P. 171). 230