Canon VIXIA HF R10 VIXIA HF R10/HF R11/HF R100 Instruction Manual - Page 100
Printing Photo
View all Canon VIXIA HF R10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Printing Photos Printing Photos (Direct Print) The camcorder can be connected to any PictBridge-compatible printer. You can mark in advance the photos you want to print and set the desired number of copies as a print order ( 103). Canon printers: SELPHY printers of the CP, DS and ES series and PIXMA printers marked with the PictBridge logo. Operating modes: Connecting the Camcorder to the Printer 1 Set the camcorder to mode, single photo view. / You can select the photos in the built-in memory or on the memory card. Afterwards, move the zoom lever toward T to return to single photo view. 2 Turn on the printer. 3 Connect the camcorder to the printer using the supplied USB cable. • Connection 4 . Refer to Connection Diagrams ( 109). • If the device selection screen appears, select [Computer/Printer] and press . • appears and changes to . IMPORTANT • If continues to flash (for more than 1 minute) or if does not appear, the camcorder is not correctly connected to the printer. In such case, disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection. • During the following operations, even if you connect a printer to the camcorder it will not be recognized. - Deleting all photos 100 Photos