Canon imageCLASS MF5550 imageCLASS MF5500 Series Basic Guide - Page 64
Specifying the Paper Size and Type, Common for Cassette and Multi-Purpose Feeder
View all Canon imageCLASS MF5550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Copying Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder) NOTE When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty, wait about 1 minute before making copies. The paper in the multi-purpose feeder is fed prior to the paper in the cassette. The settings changed in the Menu do not return automatically to the settings you set previously. Change to the previous settings again if necessary. When making copies of a small size or heavy paper*, etc., the copy speed may be slightly slower than usual. * The paper type should be selected in the Menu. If you intend to make a copy and print with a thermal transfer printer using the same sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a 5 paper jam. When copying onto transparencies, remove each transparency from the output tray as it is output. Specifying the Paper Size At the factory, the paper size has already been set to . Normally, you can make copies in this setting. When making copies on other sizes of paper, you need to specify the paper size according to the following. 1 Press [Menu]. 2 Press [ ] or [ ] to select ➞ press [Set]. 3 Press [ ] or [ ] to select ➞ press [Set]. 4 Press [ ] or [ ] to select ➞ press [Set]. Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose 5-3 Feeder)