Canon imagePROGRAF TM-200 Guide for Media Configuration Tool - Page 124
ICC Profile
View all Canon imagePROGRAF TM-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Important • Depending on your model, this sheet will not appear. Note • If the Calibration Target of the selected base paper was set to Not creatable in the Create Custom Paper dialog box when the custom paper was added, the calibration target cannot be created. • Calibration can be performed for custom paper if a calibration target has been created. 1. Click the Start button. The Paper Source dialog box appears. 2. Select the paper size of the custom paper and paper source where the custom paper is loaded. Important • The paper sources that can be loaded vary depending on the custom paper. • If you are using a PRO-1000 or PRO-500 model, only the Top Feed can be used as the paper source for color calibration. 3. Load the custom paper in the paper source you selected. Important • Do not load paper that is curled or that has already been printed on. • If a paper source cannot be selected, load the paper into the paper source that is displayed in Paper Source. 4. Select the custom paper set on the printer control panel. 5. Click the OK button. Note • It takes approximately 15 minutes until the calibration target is created. The calibration target is created for the loaded custom paper. 5. ICC Profile sheet 124