Casio EX-Z1200 Owners Manual - Page 277
Casio EX-Z1200 - EXILIM ZOOM Digital Camera Manual
UPC - 079767622770
View all Casio EX-Z1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Problem Possible Causes and Action An image I shot was not saved. 1) Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. When the battery indicator shows " ", charge the battery as soon as possible (page 37). 2) You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete. Though available lighting is bright, the faces of people in the image are dark. Not enough light is reaching the subjects. Change the flash mode setting to " synchro flash (page 76), or use adjust EV shift to the + side (page 141). " (Flash On) for daylight Subjects are too bright when shooting images in a seashore or ski area. Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode setting to " " (Flash On) for daylight synchro flash (page 76), or use adjust EV shift to the + side (page 141). Digital zoom does not work. The zoom bar indicates zoom only up to a zoom factor of 3.0. 1) The digital zoom setting may be turned off. Turn on digital zoom (page 75). 2) Time stamping may be turned on, which will cause digital zoom to be disabled. Turn off time stamping (page 151). Recognition of a family member's face is not recognized correctly, even though the face has been recorded. Though face characteristics were recorded for your family member, the data may have been faulty, or the angle to the face or its expression may be making recognition difficult. Re-record the face of the family member who is not being recognized (page 95). The image is out of focus during movie recording. 1) Focusing is not possible because the subject is outside the focus range. Shoot within the allowable range. 2) The lens may be dirty. Clean the lens (page 35). During movie recording, the REC light keeps going out and the monitor screen keeps going dim suddenly. The camera is designed to turn off the REC light and decrease the brightness level of the monitor screen automatically whenever its temperature exceeds a preset level during movie recording. If you keep recording under these conditions, "ALERT" will appear on the monitor screen and movie recording will stop automatically. If this happens, turn off the camera and wait until it cools down before trying to use it again. C 277 APPENDIX