Cisco SLM2008PT-NA Administration Guide - Page 35
Configuring 802.1X Parameter, Admin State, Force-Authorized, Port State, Re-authenticate
View all Cisco SLM2008PT-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Advanced Configuration Security 5 STEP 3 In the 802.1X Setting Table section, select the following: • Admin State-Select one of the following options from the drop-down menu to set the authentication mode: - Auto-Requires a dot1x-aware client to be authorized by the authentication server. Clients that are not dot1x-aware will be denied access. - Force-Authorized-Forces the port to grant access to all clients, either dot1x-aware or otherwise. (This is the default setting.) - Force-Unauthorized-Forces the port to deny access to all clients, either dot1x-aware or otherwise. • Port State-Displays the state of the 802.1X for each port. • Re-authenticate-It will trigger the switch to ask a connected client to restart authentication process. • Force Reinitialize-It will trigger the specific port of the switch to restart 802.1X process. • Statistics-The switch can display statistics for 802.1X protocol exchanges for any port. STEP 4 Click Save. Configuring 802.1X Parameter When 802.1X is enabled, you need to configure the parameters for the authentication process that runs between the client and the Cisco SLM2008 switch. The client identity lookup process that runs between the switch and authentication server also needs to be configured. These parameters are described in this section. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 30