Cisco SLM2008PT-NA Administration Guide - Page 53
Multicast > IGMP Settings, Enable IGMP Snooping, Enable Unregistered IP Multicast Flooding, VLAN ID
View all Cisco SLM2008PT-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Advanced Configuration Multicast 5 The Multicast > IGMP Settings window displays the current IGMP settings. NOTE All functions listed on the Multicast > IGMP Settings window require "Enable IGMP Snooping" to be enabled before settings will take effect. To configure the IGMP settings, follow these steps: STEP 1 Click Multicast > IGMP Settings. STEP 2 Configure the IGMP settings. • Enable IGMP Snooping-Check the check box to enable IGMP Snooping on the switch. • Enable Unregistered IP Multicast Flooding-Check the check box to enable Unregistered IP Multicast Flooding on the switch. • VLAN ID-Displays the VLAN ID number. • Enable IGMP Snooping-Check the check box to enable IGMP Snooping on each VLAN interface. • Enable IGMP Querying-Check the check box to enable IGMP Querying on each VLAN interface. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 48