Cisco SLM2008PT-NA Administration Guide - Page 41
QoS > QoS Settings, Strict Priority, WRR Weight, Set the Queue Mode to Strict Priority or WRR.
View all Cisco SLM2008PT-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Advanced Configuration QoS 5 The QoS > QoS Settings window displays the current QoS settings. To configure the QoS settings, follow these steps. STEP 1 Click QoS > QoS Settings. STEP 2 Set the Queue Mode to Strict Priority or WRR. • Strict Priority-Services the egress queues in sequential order, transmitting all traffic in the higher priority queues before servicing lower priority queues. • WRR-Weighted Round-Robin shares bandwidth at the egress ports by using scheduling weights 1, 2, 4, 8 for queues 1 through 4 respectively. - WRR Weight-Displays the WRR weights to queues. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 36
Advanced Configuration
QoS
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
36
5
The QoS > QoS Settings window displays the current QoS settings.
To configure the QoS settings, follow these steps.
STEP 1
Click
QoS > QoS Settings
.
STEP 2
Set the Queue Mode to Strict Priority or WRR.
•
Strict Priority
—Services the egress queues in sequential order,
transmitting all traffic in the higher priority queues before servicing lower
priority queues.
•
WRR
—Weighted Round-Robin shares bandwidth at the egress ports by
using scheduling weights 1, 2, 4, 8 for queues 1 through 4 respectively.
-
WRR Weight
—Displays the WRR weights to queues.