Cisco SLM2008PT-NA Administration Guide - Page 55
Configuring Ping, Admin > Ping, Target IP Address, Count, Time Out
View all Cisco SLM2008PT-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Advanced Configuration Admin 5 Configuring Ping You can use a ping to see if another site on the network can be reached. Ping sends ICMP echo request packets to another node on the network. The Admin > Ping window displays the current ping settings. To configure the ping settings, follow these steps: STEP 1 Click Admin > Ping. STEP 2 Configure the Ping Parameters. • Target IP Address-Enter the IP address of the device you want to ping. • Count-From the drop-down menu, select the maximum count to the target IP address for each attempt. • Time Out-From the drop-down menu, select the time out (in seconds) interval if the device does not respond. STEP 3 To test the ping, click Test. The test results are displayed in the Ping Results section. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 50