Compaq 8000 Technical Reference Guide: HP Compaq 8000 Elite Series Business De - Page 56
Parallel Interface Connector, o
UPC - 884420665106
View all Compaq 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Input/Output Interfaces 5.4.4 Parallel Interface Connector Figure 5-4 and Table 5-3 show the connector and pinout of the parallel connector provided on the optional parallel bracket/cable assembly. Note that some signals are redefined depending on the port's operational mode. e wq-98 7 6 5 4 321 g fdsapo iuytr Figure 5-4. DB-25 Parallel Interface Connector (female, as viewed from rear of chassis) Table 5-3. DB-25 Parallel Connector Pinout Pin Signal Function 1 STB- Strobe / Write [1] Pin Signal Function 14 LF- Line Feed [2] 2 D0 Data 0 15 ERR- Error [3] 3 D1 4 D2 Data 1 Data 2 16 INIT- Initialize Paper [4] 17 SLCTIN- Select In / Address. Strobe [1] 5 D3 Data 3 18 GND Ground 6 D4 7 D5 Data 4 Data 5 19 GND 20 GND Ground Ground 8 D6 Data 6 21 GND Ground 9 D7 Data 7 22 GND Ground 10 ACK- Acknowledge / Interrupt [1] 23 GND Ground 11 BSY 12 PE Busy / Wait [1] Paper End / User defined [1] 24 GND 25 GND Ground Ground 13 SLCT Select / User defined [1] -- -- -- NOTES: [1] Standard and ECP mode function / EPP mode function [2] EPP mode function: Data Strobe ECP modes: Auto Feed or Host Acknowledge [3] EPP mode: user defined ECP modes:Fault or Peripheral Req. [4] EPP mode: Reset ECP modes: Initialize or Reverse Req. 5-6 www.hp.com Technical Reference Guide