Compaq 8000 Technical Reference Guide: HP Compaq 8000 Elite Series Business De - Page 66

NIC Connector, 8.5 NIC Specifications, Table 5-11. NIC Specifications - specs

Page 66 highlights

Input/Output Interfaces 5.8.4 NIC Connector Figure 5-11 shows the RJ-45 connector used for the NIC interface. This connector includes the two status LEDs as part of the connector assembly. Speed LED Activity LED Pin 1 2 3 6 4, 7, 8 Description Transmit+ TransmitReceive+ ReceiveNot used 8 7654321 Figure 5-11. RJ-45 Ethernet TPE Connector (as viewed from rear of chassis) 5.8.5 NIC Specifications Table 5-11. NIC Specifications Parameter Compatibility standard orprotocol Modes Supported 10BASE-T half duplex @ 10 Mb/s 10Base-T full duplex @ 20 Mb/s 100BASE-TX half duplex @ 100 Mb/s 100Base-TX full duplex @ 200 Mb/s 1000BASE-T half duplex @ 1 Gb/s 1000BASE-TX full duplex @ 2 Gb/s Standards Compliance IEEE 802.1P, 802.1Q IEEE 802.2 IEEE 802.3, 802.3ab, 802.3ad, 802.3u, 802.3x, 802.3z OS Driver Support MS-DOS MS Windows XP Home/Pro, Vista Home/Pro, Windows 7 MS Windows NT 3.51 & 4.0 Novell Netware 3.x, 4.x, 5x Novell Netware/IntraNetWare SCO UnixWare 7 Linux 2.2, 2.4 PXE 2.0 Boot ROM Support Intel PRO/100 Boot Agent (PXE 3.0, RPL) F12 BIOS Support Yes Bus Inteface PCI Express x1 Power Management Support ACPI, PCI Power Management Spec. 5-16 www.hp.com Technical Reference Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114

5-16
www.hp.com
Technical Reference Guide
Input/Output Interfaces
5.8.4 NIC Connector
Figure 5-11 shows the RJ-45 connector used for the NIC interface. This connector includes the
two status LEDs as part of the connector assembly.
Figure 5-11.
RJ-45 Ethernet TPE Connector (as viewed from rear of chassis)
5.8.5 NIC Specifications
1
2
43
8765
Pin
Description
1
Transmit+
2
Transmit-
3
Receive+
6
Receive-
Activity LED
Speed LED
4, 7, 8
Not used
Table 5-11. NIC Specifications
Parameter
Compatibility standard orprotocol
Modes Supported
10BASE-T half duplex @ 10 Mb/s
10Base-T full duplex @ 20 Mb/s
100BASE-TX half duplex @ 100 Mb/s
100Base-TX full duplex @ 200 Mb/s
1000BASE-T half duplex @ 1 Gb/s
1000BASE-TX
full duplex @ 2 Gb/s
Standards Compliance
IEEE 802.1P, 802.1Q
IEEE 802.2
IEEE 802.3, 802.3ab, 802.3ad, 802.3u, 802.3x, 802.3z
OS Driver Support
MS-DOS
MS Windows XP Home/Pro, Vista Home/Pro, Windows 7
MS Windows NT 3.51 & 4.0
Novell Netware 3.x, 4.x, 5x
Novell Netware/IntraNetWare
SCO UnixWare 7
Linux 2.2, 2.4
PXE 2.0
Boot ROM Support
Intel PRO/100 Boot Agent (PXE 3.0, RPL)
F12 BIOS Support
Yes
Bus Inteface
PCI Express x1
Power Management Support
ACPI, PCI Power Management Spec.