Compaq 8000 Technical Reference Guide: HP Compaq 8000 Elite Series Business De - Page 95

Technical Reference Guide, Error Messages and Codes, for systems with 2 SATA ports, systems with 4

Get Compaq 8000 - Elite Convertible Minitower PC PDF manuals and user guides
UPC - 884420665106
View all Compaq 8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Error Messages and Codes Table A-2. (Continued) Power-On Self Test (POST) Messages Error Message Probable Cause 514-CPU or Chassis Fan not detected. CPU fan is not connected or may have malfunctioned. 601-Diskette Controller Error Diskette drive removed since previous boot. 605-Diskette Drive Type Error Mismatch in drive type. 912-Computer Cover Removed Since Last System Start Up Cover (hood) removal has been detected by the Smart Cover Sensor. 914-Hood Lock Coil is not Connected Smart Cover Lock mechanism is missing or not connected. 916-Power Button Not Connected Power button harness has been detached or unseated from the system board. 917-Expansion Riser Not Detected Expansion (backplane) board not seated properly. 919-Front Panel, MultiPort, and/or Riser card has been removed or has not been reinstalled properly in MultiBay Risers not Detected the system. 1156-Serial Port A Cable Not Detected Cable from serial port header to I/O connector is missing or not connected properly. 1157-Front Cables Not Detected Cable from front panel USB and audio connectors is missing or not connected properly. 1720-SMART Hard Drive Detects Imminent Failure SMART circuitry on an IDE drive has detected possible equipment failure. 1721-SMART SCSI Hard Drive Detects Imminent Failure SMART circuitry on a SCSI drive has detected possible equipment failure. 1785-MultiBay incorrectly installed For integrated MultiBay/ USDT systems: MultiBay device not properly seated. or MultiBay riser not properly seated. 1794--Inaccessible device attached A device is attached to SATA 1. Any device attached to this connector to SATA 1 will be inaccessible while "SATA Emulation" is set to "Combined IDE (for systems with 2 SATA ports) Controller" in Computer Setup. 1794-Inaccessible devices attached A device is attached to SATA 1 and/or SATA 5. to SATA 1 and/or SATA 5 (for systems with 4 SATA ports) Devices attached to these connectors will be inaccessible while "SATA Emulation" is set to "Combined IDE Controller" in Computer Setup 1796-SATA Cabling Error One or more SATA devices are improperly attached. For optimal performance, the SATA 0 and SATA 1 connectors must be used before SATA 2 and SATA 3. Technical Reference Guide www.hp.com A-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
Technical Reference Guide
www.hp.com
A-3
Error Messages and Codes
514-CPU or Chassis Fan not
detected.
CPU fan is not connected or may have malfunctioned.
601-Diskette Controller Error
Diskette drive removed since previous boot.
605-Diskette Drive Type Error
Mismatch in drive type.
912-Computer Cover Removed
Since Last System Start Up
Cover (hood) removal has been detected by the Smart Cover Sensor.
914-Hood Lock Coil is not
Connected
Smart Cover Lock mechanism is missing or not connected.
916-Power Button Not Connected
Power button harness has been detached or unseated from the system
board.
917-Expansion Riser Not Detected
Expansion (backplane) board not seated properly.
919-Front Panel, MultiPort, and/or
MultiBay Risers not Detected
Riser card has been removed or has not been reinstalled properly in
the system.
1156-Serial Port A Cable Not
Detected
Cable from serial port header to I/O connector is missing or not
connected properly.
1157-Front Cables Not Detected
Cable from front panel USB and audio connectors is missing or not
connected properly.
1720-SMART Hard Drive Detects
Imminent Failure
SMART circuitry on an IDE drive has detected possible equipment
failure.
1721-SMART SCSI Hard Drive
Detects Imminent Failure
SMART circuitry on a SCSI drive has detected possible equipment
failure.
1785-MultiBay incorrectly installed
For integrated MultiBay/ USDT systems
:
MultiBay device not properly seated.
or
MultiBay riser not properly seated.
1794--Inaccessible device attached
to SATA 1
(for systems with 2 SATA ports)
A device is attached to SATA 1. Any device attached to this connector
will be inaccessible while “SATA Emulation” is set to “Combined IDE
Controller” in Computer Setup.
1794-Inaccessible devices attached
to SATA 1 and/or SATA 5
(for
systems with 4 SATA ports)
A device is attached to SATA 1 and/or SATA 5.
Devices attached to these connectors will be inaccessible while “SATA
Emulation” is set to “Combined IDE Controller” in Computer Setup
1796-SATA Cabling Error
One or more SATA devices are improperly attached. For optimal
performance, the SATA 0 and SATA 1 connectors must be used before
SATA 2 and SATA 3.
Table A-2.
(Continued)
Power-On Self Test (POST) Messages
Error Message
Probable Cause