Compaq BL20p Installation Guide - Page 23
DIMM Installation Guidelines, DIMM slots, Table 2-2
UPC - 720591771058
View all Compaq BL20p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing the Server Blade and Options Figure 2-6: DIMM slots Table 2-2: DIMM Slots Item 1 2 3 4 Description DIMM slot 1A (populated) DIMM slot 2A (populated) DIMM slot 3B DIMM slot 4B DIMM Installation Guidelines You must observe the following guidelines when installing additional memory: • Install only 133-MHz registered SDRAM, 3.3-V, 72-bit wide, ECC DIMMs in the server blade. • Install identical DIMMs as pairs only. IMPORTANT: Install identical DIMMs in slots 1A and 2A. You can install a second set of identical DIMMs in slots 3B and 4B. • Populate both slots in a bank at the same time. Compaq ProLiant BL20p Server Blade Setup and Installation Guide 2-9
Installing the Server Blade and Options
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
2-9
Figure 2-6:
DIMM slots
Table 2-2:
DIMM Slots
Item
Description
1
DIMM slot 1A (populated)
2
DIMM slot 2A (populated)
3
DIMM slot 3B
4
DIMM slot 4B
DIMM Installation Guidelines
You must observe the following guidelines when installing additional memory:
•
Install only 133-MHz registered SDRAM, 3.3-V, 72-bit wide, ECC DIMMs in
the server blade.
•
Install identical DIMMs as pairs only.
IMPORTANT:
Install identical DIMMs in slots 1A and 2A. You can install a second set of
identical DIMMs in slots 3B and 4B.
•
Populate both slots in a bank at the same time.