Compaq BL20p Installation Guide - Page 45
iLO Virtual Floppy Deployment
UPC - 720591771058
View all Compaq BL20p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Configuring and Deploying Server Blades • For detailed instructions on network-based PXE installation for Red Hat Linux, refer to the white papers on www.compaq.com/support iLO Virtual Floppy Deployment You can use a diskette or diskette image to perform local or remote server blade deployment without a PXE-enabled server. Deployment Infrastructure To establish the diskette or diskette image deployment infrastructure, you must provide the following software and minimum hardware: • Client PC (administrative workstation) - Intel Pentium III or higher processor (700 MHz or greater recommended) - 128 MB of RAM - Microsoft Windows 2000 Professional or Microsoft Windows XP operating system - Microsoft Internet Explorer 5.5 or above with 128-bit encryption - Ethernet NIC with 10/100 RJ-45 connector - TCP/IP networking and an IP address compatible with one of the following: the iLO Diagnostic Port IP address or an assigned DHCP or static IP address - CD-ROM drive and/or diskette drive - Java Runtime Environment version 1.3.1, available at www.compaq.com/manage/jvm.html • Network server with an operating system installed 3-8 Compaq ProLiant BL20p Server Blade Setup and Installation Guide