Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O2000 for Orac - Page 150
Installing the Operating System Software and Configuring the RA4000/RA4100 Arrays
View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Installation and Configuration 5-21 Installing the Operating System Software and Configuring the RA4000/RA4100 Arrays You will follow an automated procedure using Compaq SmartStart to install the operating system software and configure the shared storage disks on the RA4000/RA4100 Arrays. Guidelines for Clusters Installing clustering software requires several specific steps and guidelines that might not be necessary when installing software on a single server. Be sure to read and understand the following items before proceeding with the specific software installation steps in "Automated Installation Steps." I Because a PDC/O2000 contains multiple servers, have sufficient software licensing rights to install Windows NT Server software applications on each server. I Be sure your servers, adapters, hubs, and switches are installed and cabled before you install the software. I Power on the cluster as instructed later in this chapter in "Power Distribution and Power Sequencing Guidelines." I SmartStart runs the Compaq Array Configuration Utility, which is used to configure the drives in the RA4000/RA4100 Arrays. The Array Configuration Utility stores the drive configuration information on the drives themselves. After you have configured the shared drives from one of the cluster nodes, it is not necessary to configure the drives from the other cluster nodes. When the Array Configuration Utility runs on the first cluster node, configure the shared drives in the RA4000/RA4100 Array. When SmartStart runs the utility on the other cluster nodes, you will be presented the information on the shared drives that was entered when the Array Configuration Utility was run on the first node. Accept the information as presented and continue. NOTE: Local drives on each cluster node still need to be configured.