Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O2000 for Orac - Page 45
Cabling the Fibre Host Adapters to the Storage Hubs or Switches
View all Compaq ProLiant 6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Cluster Architecture 2-21 I In each RA4000/RA4100 Array, the bottom (rack model) or left rear (tower model) array controller is always the standby controller. I The odd-numbered Fibre Channel SAN Switch (Fibre Channel SAN Switch #1) is connected to the active array controller in each RA4000/RA4100 Array. I The even-numbered Fibre Channel SAN Switch (Fibre Channel SAN Switch #2) is connected to the standby array controller in each RA4000/RA4100 Array. NOTE: The following active/standby configurations are examples only. You are not required to follow these configurations. For more information about installing active/standby configurations, refer to the following sections in Chapter 5, "Installation and Configuration": I "Cabling the Fibre Host Adapters to the Storage Hubs or Switches" I "Cabling the Storage Hubs or Switches to the RA4000 Array Controllers" In Figures 2-6 through 2-10, active I/O path components have been shaded to distinguish them from standby (inactive) components. Black Fibre Channel cables identify connections between active components; gray cables identify connections between standby components.