Compaq ProLiant 6500 Compaq Parallel Database Cluster Model PDC/O2000 for Orac - Page 155

5-26 Compaq Parallel Database Cluster Model PDC/O2000 for Oracle8i and Windows 2000 Administrator Guide Installing Secure Path Software for Windows 2000 The Secure Path software for Windows 2000 is installed on both the server and the client. The Secure Path server software is installed on the Windows host system to which the RAID storage system is connected. TCP/IP must be installed on the host system. Secure Path software must be installed on each member of the cluster. NOTE: Secure Path installation requires that a temporary directory be available on the system drive. For example: C:\Temp Installing the Secure Path Server Software To install the Secure Path Server software: 1. Insert the Compaq SANWorks Secure Path Software CD into your CD-ROM drive. 2. If you have AutoRun enabled on your server, the Secure Path setup program will start automatically. If AutoRun is not enabled, select Run from the Start menu and enter the following command: DRIVE_LETTER:\spinstall\setup.exe where DRIVE_LETTER is the drive letter assigned to the CD-ROM drive. 3. When the setup begins, select the destination path. Select Secure Path Server Install to install the required drivers and agent on your server. The Server Install option prompts you to designate clients permitted to manage the host. Setup, by default, lists the proper DNS name to use for accessing the local host from a client (Secure Path Manager) running on the local host. NOTE: Check with your System Administrator to ensure that the correct TCP/IP network configurations and protocols have been established. 4. Enter a validation password. The password must be the same for each member of the cluster.