Cuisinart FPC-100 User Manual - Page 14
Securing The Food, Processor Lid To The, Work Bowl
View all Cuisinart FPC-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Assembling Dicer in the Work Bowl 1. Place Stem Adapter on hub in bottom of Work Bowl. 2. Carefully place Dicing Grid onto the Stem Adapter with the grid positioned closest to the front of the food processor. Be sure "This Side Up" shows on top. The cutting grid should be facing the triangle on front of the grid and line up with the front center of the work bowl. Dicer will not work if inserted incorrectly. 2. Lower the Lid onto the Work Bowl, aligning the locking tabs (B) under the lid grips with the metal tabs (C) on the bowl. B C 3. Press Lid down and rotate clockwise. D 3. Place Dicing Disc on top of grid. Push down slightly to lock into place. It should not move if correctly positioned. NOTE: Always use caution when handling the dicing blade: It is very sharp. A 4. Continue rotating clockwise until you hear and see the lid locking mechanisms on bowl handles and lid grips (A) click into place (D). D D SECURING THE FOOD PROCESSOR LID TO THE WORK BOWL 1. Place the Lid over the Work Bowl with the lid grips (A) positioned at approximately 1 and 7 o'clock. NOTE: To remove Lid, simply grip firmly and turn counterclockwise until lid grips are in the 1 and 7 o'clock position and lift up. A A 14 PREPPING