D-Link DSN-6110 User Manual for DSN-6110 & DSN-6110 with DSN-610 - Page 27
Quick setup
View all D-Link DSN-6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 3 Quick setup 3.1 Management interfaces There are three management methods to manage D-Link IP SAN storage, describe in the following: 3.1.1 Serial console Use console cable (NULL modem cable) to connect from console port of D-Link IP SAN storage to RS 232 port of management PC. Please refer to figure 2.3.1. The console settings are on the following: Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control. Terminal type: VT100 Login name: admin Default password: 123456 3.1.2 Remote control SSH (secure shell) software is required for remote login. The SSH client software is available at the following web site: SSH Tectia Client: http://www.ssh.com/ PuTTY: http://www.chiark.greenend.org.uk/ Host name: 192.168.0.32 (Default IP) Login name: admin Default password: 123456 Tips D-Link product supports SSH for remote control only. For using SSH, the IP address and password are required for login. 3.1.3 Web UI D-Link IP SAN storage supports graphic user interface (GUI) to operate. Be sure to connect the LAN cable. The default IP setting is 192.168.0.32; open the browser and enter: http://192.168.0.32 And then it will pop up a dialog for authentication. 27