D-Link DSN-6110 User Manual for DSN-6110 & DSN-6110 with DSN-610 - Page 97
SAS JBOD expansion
View all D-Link DSN-6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
5.7 SAS JBOD expansion 5.7.1 Connecting JBOD D-LINK DSN-6000 series support up to 4 additional SAS/SATA JBODs for capacity expansion. When connecting to a dual-controller JBOD, it will display in "Show PD for:" of "/ Volume configuration / Physical disk". For example, Local, JBOD 1 (DSN6020), JBOD 2 (DSN-6020), ...etc. Local means disks in local controller, and so on. The hard drives in JBOD can be used as local disks. "/ Enclosure management / Hardware monitor" can display the hardware status of SAS JBODs. "/ Enclosure management / S.M.A.R.T." can display S.M.A.R.T. information of all PDs, including Local and all SAS JBODs. SAS JBOD expansion has some constraints as described in the followings: 1 User could create RAID group among multiple chassis, max number of disks in a single RAID group is 32. 2 Global spare disk can support all RAID groups which located in the different chassis. 3 When support SATA drives for the redundant JBOD model, the SATA bridge board is required. 4 The following table is the maximum JBOD numbers and maximum HDD numbers with different chassises can be cascaded. RAID Storage System DSN-6020 no. Max HDD no. Dual controllers + Dual JBOD DSN-6110w/DSN-610 4 60 5.7.2 Upgrade firmware of JBOD To upgrade the firmware of JBOD, please follow the procedures. 1 There is a hidden web page for JBOD firmware upgrade. Please login Web UI as username admin first, and then add this URL to the browser. (http://Management IP/jbod_upg.php), for example: http://192.168.10.50/jbod_upg.php 97