D-Link DSN-6110 User Manual for DSN-6110 & DSN-6110 with DSN-610 - Page 65
Example
View all D-Link DSN-6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4.4.6 Example The following is an example to create volumes. This example is to create two VDs and set a global spare disk. • Example This example is to create two VDs in one RG, each VD shares the cache volume. The cache volume is created after system boots up automatically. Then set a global spare disk. Last, delete all of them. Step 1: Create a RG (RAID group). To create a RAID group, please follow the procedures: Figure 4.4.6.1 1. Select "/ Volume configuration / RAID group". 2. Click "Create". 3. Input a RG Name, choose a RAID level from the list, click "Select PD" to choose the RAID physical disks, then click "OK". 4. Check the setting. Click "OK" if all setups are correct. 5. Done. A RG has been created. Figure 4.4.6.2 (Figure 4.4.6.2: Creating a RAID 5 with 3 physical disks, named "RG-R5".) 65